S2C Newsletter 2010 Summer Issue
www.s2cinc.com

The rate of change in the electronics industry continues to increase and the cost of an error becomes even more costly.  A slipped schedule can be the difference between success or failure.  The pressure is on SoC designers to design the right product and to get the product to market ahead of the competition. Today’s products are really imbedded systems where the software content is often larger than the electronic content.  It is crucial that software development begin as early as possible.

FPGA based rapid SoC prototyping is becoming an integral part of SoC design. Engineers can rapidly prototype and test the electronic system at real-time or close to real-time speeds.  Once the design is finalized, the SoC prototyping platform can be used by software developers to test their software under actual operating conditions. 

S2C is much more than a FPGA board supplier.  We provide software to migrate your design to our prototyping boards and we supply a broad array of analog and digital Prototype Ready IP™ to enable you to rapidly build your SoC prototype.

In the recent SoCIP2010 IP Symposium for System Prototyping in China, the push for “the era of design with system-prototyping IP” was very much evident. The upcoming era will speed up product development and give the power to innovate at a quicker pace. This is the strategic difference against your competitors. Corporations should encourage SoC developers to use FPGA-based system prototyping solution where the benefits are enormous. Read on and find out more.


IN THIS ISSUE
 
  • S2C Announces 4th Generation Rapid SoC Prototyping Solution

  • The Trend of Integrating WiFi into a SoC

  • The Third Annual SoCIP Show was a Major Success

  • EDA Veteran Steve Pollock Named S2C VP of Marketing and Business Development
  •  



     New Product
    S2C Announces 4th Generation Rapid SoC Prototyping Solution

    S2C announces the release of its fourth-generation rapid SoC prototyping tool, S4 TAI Logic Module, based on Altera's 40-nm Stratix® IV field-programmable-gate-array (FPGA).

    Equipped with two Stratix IV EP4SE820 FPGAs, each featuring 820K logic elements (LEs), the Dual S4 TAI Logic Module supplies up to 30 million ASIC gates of capacity and provides 1,286 external I/O connections.  Multiple TAI Logic Modules can be stacked or mounted on a interconnect mother board to meet even larger gate count needs.

    Read More >>
     IP Solution
    The Trend of Integrating WiFi into a SoC

    WiFi is everywhere, computer, netbook, smart phone, digital TV etc. Many of today’s solutions use an external WiFi chip. But to make the SoC more competitive, providers should consider integrating the WiFi function into the chip. The embedded solution consumes smaller PCB board area, leads to lower BOM cost, and reduces reliance on the WiFi chip providers.  At S2C, we are seeing the trend of integration.

    S2C partners Ittiam and Cosmic Circuits to offer a complete WiFi IP solution. Now chip designers have the IP to integrate the WiFi function. The WiFi solution includes the AFE (Analog Front-End), Baseband and upper level MAC controller. Having been proven in real chips, this is the world most mature and complete WiFi IP solution.

    The AFE, developed by Cosmic Circuits, is delivered as GDSII, available in 90nm, 65nm, 55nm and 40nm technology nodes. Cosmic Circuits is a leading provider of differentiated Analog and Mixed-Signal silicon IP and complete analog chip solutions. Its knowledge and experience in the analog design area assure designers’ success of using the AFE core.

    The baseband and MAC controller are from Ittiam. The baseband supports IEEE 802.11 a/b/g/n(up to 4x4 MIMO), and the MAC part supports 802.11 a/b/g/i/e/n standards. The baseband is designed in RTL, while MAC controller is a combination of RTL and C code software. The cores have been licensed to over 10 customers around the world. Ittiam’s7 years of success in offering WiFi solutions, assures you of not only outstanding IP and technology, but also gives you the confidence of chip success at first tape-out.

    Please contact S2C to get more information this powerful WiFi solution or to have further discussion with our technical experts. You can also go to S2C website for more information.

    Read More >>
     Events
    The Third Annual SoCIP Show was a Major Success

    The annual SoC IP Symposium is China’s premier show to feature the latest technology and product information for the SoC design community. This year’s show, which was held in Shanghai and Beijing in June, attracted over 300 qualified attendees and 14 exhibitors. The show is organized by S2C, a leading rapid SoC prototyping company, headquartered in San Jose, CA with development and support centers in Shanghai and Beijing.

    This one day show allows for attendee interaction with the IP and design service vendors in both question and answer sessions and vendor-attendee interaction at the exhibit portion of the show. Attendees have the opportunity to share their design specifications and challenges and explore solutions with the vendors. S2C, as the organizer, thanks all the exhibitors, and media for their participation in making SoCIP2010 a valuable resource for the SoC design community.

    Read More >>
     Company News
    EDA Veteran Steve Pollock Named S2C VP of Marketing and Business Development

    S2C Inc., a leading supplier of rapid SoC prototyping tools in Asia has hired Steve Pollock as VP of Marketing and Business Development. Steve will focus on expanding S2C’s world-wide market presence and build additional relationships with EDA, IP, and Design Services vendors.

    Steve has a rich IC design and EDA marketing background. Steve started his career as custom chip designer at Texas Instruments. After his successful chip design career, Steve moved into high technology marketing, first in the semiconductor industry and later in the EDA industry. Prior to joining S2C, Steve was an independent marketing and sales consultant with a primary focus on launching emerging companies. His EDA clients included: Anasift, Beach Software, Cadence Design Systems, IC Manage, JEDA Technologies, S2C, and VCX Software. His consumer electronics clients included Adaptive Sound Technologies and HiBox.

    Read More >>

    About S2C

    Founded and headquartered in San Jose, California, S2C has been successfully delivering rapid SoC prototyping tools since 2003. S2C provides:

      • Rapid SoC FPGA-based prototyping hardware systems plus design and verification software.
      • Third-party Prototype Ready IP™
      • SoC design, prototype and production services

    S2C’s value proposition is our highly qualified engineering team and customer-focused sales force that understands our customers’ commercial SoC development needs. S2C’s unique FPGA-based electronic system level (ESL) solution, using our patented TAI IP technology, enables designers to quickly assemble FPGA-based SoC prototypes on S2C FPGA boards easily and securely. This enables customers to start software development, typically the long pole item in development schedules, immediately. Combining rapid prototyping methodologies with a comprehensive portfolio of Prototype Ready IP and advanced design solutions, S2C can reduce the SoC design cycle by up to nine months.

    Tel: +1 408 213 8818, USA
      +86 -21 -6887 9287, Shanghai
      +86 -10 -5873 2494, Beijing
      +86 -755 -2676 6711, Shenzhen
    Email: sales@s2cinc.com
    Website: www.s2cinc.com