View in your browser
S2C Newsletter
2014 Summer Issue

Chairman's Message
Mon-Ren Chene
Chairman and CTO

I am excited to see that FPGA-based prototyping has gone main-stream in the last 12 months and attracted a good deal of media attention. This is in line with S2C’s prediction that FPGA-based prototyping will be an indispensable methodology in today’s SoC design flow, especially with software continuing to be the design bottleneck.
FPGA-based prototyping is not simply putting an FPGA on a printed circuit board. There are many factors to be considered including performance, system interface capabilities, scalability, reusability, reliability, compile flow, debug flow, and more. S2C has been dedicated to FPGA-based prototyping solutions for over 10 years and we continue to provide the best all-in-one tool that addresses the full range of requirements for a high-performance prototyping platform.

IN THIS ISSUE
  • New ProtoBridge AXI expands FPGA-Based Prototype Usage
  • S2C Opens Direct Office in Japan
  • DAC 2014 – Live Demo Showcases FPGA-based Prototyping Usage for Various Design Stages

  • With the release of ProtoBridge™ version 2.1, we’ve enhanced our Transaction-based testing tool – a key enabling technology. ProtoBridge™ version 2.1 uses the widely-adopted AXI-4 bus protocol to bridge system-level simulation and FPGA-based prototyping environments. This allows users to expand their FPGA-based prototype usage beyond the traditional system validation tasks. Dozens of customers already use ProtoBridge transaction-based testing in addition, and prior to in-circuit testing. I invite you to speak with one of our sales representative to understand our different technology offering and how we can help accelerate your SoC projects.

    New ProtoBridge™ AXI expands FPGA-Based Prototype Usage

    S2C released ProtoBridge™ version 2.1 in July. This new version allows designers to easily read and write data between a host computer and designs mapped to FPGA-based prototypes using AXI-4 transactions. By utilizing a rich set of C subroutine calls, ProtoBridge AXI users can easily implement algorithm validation, block-level prototyping, full-chip simulation acceleration, corner case testing, and early SoC software development.

    The new ProtoBridge AXI release provides the following benefits:

    •  10,000 times faster verification speed over RTL simulation
    •  Links to C/C++ models and tests
    •  Create corner test cases easily
    •  Up to 8 AXI Master and 8 AXI Slave transaction interfaces
    •  Up to 500MB/s data transmission rate in DMA mode

    Follow this link for a detailed description of ProtoBridge AXI, Read More

    Contact your local S2C sales office for an on-site demo of the ProtoBridge AXI application.

    S2C Opens Direct Office in Japan

    S2C is pleased to announce the establishment of its wholly owned subsidiary, S2C Japan KK, on July 15, 2014 in Shin-Yokohama, Japan. S2C Japan KK will provide superior sales and technical support to its fast-growing customer base in the region. To lead this business effort, S2C has appointed Tomoyuki Tsuji as president of S2C Japan KK.

    “Japanese chip design companies today lead in advanced design protocols. What these firms need is a sophisticated system-level methodology and tool set. S2C has been working closely with a number of Japanese customers and partners to utilize FPGA-based prototypes in accelerating system-level design and early software development,” said Toshio Nakama, CEO of S2C. “Our new Japan office will enable us to work even closer with our partners in the system-level methodology area, as well as provide superior service and support.”

    Read More

    DAC 2014 – Live Demo Showcases FPGA-based Prototyping Usage for Various Design Stages

    S2C drew a large audience at DAC San Francisco in June to experience how FPGA-based prototyping can be used throughout the SoC/ASIC design flow. The 4 major design stages below were demonstrated on S2C’s rapid prototyping platform, the TAI Logic Module series:

    •  Design Exploration - Explore design algorithm and SoC architecture by co-modeling TAI Logic Module
        with Mentor Vista™virtual platform
    •  IP Validation - Speed up IP selection and validation using Prototype Ready™ IP with an example from
        Northwest Logic’s PCIe Gen3 IP tested on TAI Logic Module
    •  System Integration - Build rapid prototypes quickly with over 70 Prototype Ready™ TAI Logic Module
        Interface daughter cards
    •  Software Development - Achieve early software development on a virtual prototype with a bridge to TAI
        Logic Module using the Mentor’s CodeBench Virtual Edition tool

    Contact your local S2C sales office to arrange an on-site demo.


    About S2C

    Founded and headquartered in San Jose, California, S2C has been successfully delivering rapid SoC prototyping tools since 2003. S2C provides:

    • Rapid FPGA-based prototyping hardware and automation software
    • Prototype Ready™ IP, interfaces and platforms
    • System-level design verification and acceleration tools

    S2C solutions enable designers to rapidly create SoC prototypes that can run at or close to real time speed, enabling comprehensive hardware verification and early software development. S2C’s flexible, expandable, and reusable hardware architecture combined with transaction-based links to system simulations make S2C solutions an ideal common platform for major design phases including algorithm exploration, IP design, system integration, and compatibility testing. S2C currently has offices or representatives in the US, Europe, Japan, Korea, China, Taiwan, and India. For more information, visit www.s2cinc.com or email sales@s2cinc.com.

    If you no longer wish to receive these emails, please reply to this message with "Unsubscribe" in the subject line or
    simply click on the following link: Unsubscribe