InPA Systems and S2C Partner to Enhance Rapid Prototype Debug Flow

Technology to be demonstrated at SoCIP 2011, Shanghai 5/24 & Beijing 5/26

San Jose, California - May 16, 2011 - InPA Systems, Inc., an innovator in FPGA-based  rapid prototyping bring up and debug and S2C Inc., a leading rapid SoC/ASIC prototyping solutions provider, announced today that they have partnered for the development and testing of an integrated solution for high-speed, multi-FPGA debug. This technology is still in beta, but it is expected to be released in Q3 2011.  InPA will demonstrate the integrated technology with the S2C hardware at the InPA Systems booth at SoCIP 2011 and at the Design Automation Conference (DAC) 2011 in June (Booth #3216).

How do the two technologies integrate?  InPA utilizes the S2C I/O connector to access user FPGA signals and the S2C LM controller FPGA that is on the V6 TAI Logic Module.  The unique benefit of this partnership is that, because the InPA technology shares the same LM controller FPGA on the S2C TAI Logic Module, the user does not need a separate board to control the high-speed multi-FPGA trigger and capture debug activity. 

What are the unique benefits of using these combined technologies? The InPA Systems Active DebugTM technology with SmartProbe and SmartView, is the first comprehensive solution that streamlines the SoC bring-up and debug process for multiple FPGA prototype systems. The InPA technology is the only open multi-FPGA prototype solution available today for SoC verification and validation that drastically reduces FPGA implementation iterations, provides full signal debug visibility, and provides a zoom in/out methodology, all while not compromising the speed of the design running on the FPGA prototype system. InPA Systems unleashes the power of FPGA prototype systems and gets you to a SoC pre-silicon prototype faster with our Active Debug and Smart Probe technology. 

"We are pleased to offer our SoC/ASIC prototyping customers a new advanced Multi-FPGA debug capability by supporting the InPA technology," said Mon-Ren Chene, Chairman and CTO of S2C Inc. "Combining the InPA debug tools with our V6 TAI Logic Module, our customers can enjoy high speed powerful multi-FPGA debug with our proven 4th generation prototyping hardware to reduce design implementation iterations in FPGAs." "S2C has been instrumental in testing and helping integrate our technologies," said Michael Chang, CEO at InPA Systems, "The debug of today's SoCs on multi-FPGA prototype systems is daunting to say the least. Our aim is to make this process much more efficient with a combination of methodology and advanced technology." 

InPA Systems came on the scene last August when it announced the formation of its company. InPA's Active Debug™ technology allows users unprecedented visibility and control of the verification and validation process when integrating SoC software and hardware onto multi-FPGA prototype systems. What is the primary benefit to users? A drastic reduction in FPGA implementation iterations when trying to detect a HW/SW integration issue when using multi-FPGA prototype systems. 

For more information on this integrated technology see or drop by the InPA Systems booth at the SoCIP 2011 show in Shanghai and Beijing or at booth#3216 at DAC for a demonstration.

About V6 TAI Logic Module

The V6 TAI Logic Modules are S2C's fourth generation SoC/ASIC prototyping hardware and can be configured with one or two Xilinx Virtex-6 760 or 550 FPGA devices on one board to fit for ASIC/SoC designs ranging from 5.5M to 15.2 million ASIC gates. The V6 TAI Logic Module has enhanced power management, noise shielding, and cooling mechanism that enables system prototypes to attain higher performance and reliability. The V6 TAI Logic Modules can run both DDR2 memory at up to 600MHz and DDR3 memory at up to 800Mbps using on-board SO-DIMM sockets. Users can easily download FPGAs, generate programmable clocks, and self-test hardware from S2C's TAI Player Software via a USB2.0 port. 

About InPA Systems

InPA is an innovator in FPGA-based rapid prototyping bring up and debug. The company integrates RTL simulation with FPGA prototype hardware, provides at-speed Active Debug™ technology and a zoom in/out methodology into the multi-FPGA prototype to compress the time it takes to debug the hardware/software integration of SoC designs. Privately held and funded, InPA was founded in 2007 in San Jose. 
Its corporate headquarters is at 22 Great Oaks Blvd. Suite 280, San Jose, CA 95119-1457, phone: (408) 362-1541, fax: (408) 362-9087. On the Web at:

About S2C Inc.

Founded and headquartered in San Jose, California, S2C has been successfully delivering rapid SoC prototyping solutions  since 2003. S2C provides:

  • Rapid SoC FPGA-based prototyping hardware, automation software and debug tools
  • Prototype Ready™ IP, Platforms, and Accessories
  • System-level design verification and acceleration

S2C's value is our singular focus on SoC/ASIC development. Our highly qualified engineering team and customer-focused sales force understands our customers’ SoC development needs. S2C’s unique FPGA-based solution, using our patented TAI IP technology, enables designers to quickly assemble FPGA-based SoC prototypes on S2C FPGA boards. This gives customers an early start on software development, typically the long pole item in development schedules. Combining rapid prototyping methodologies with a comprehensive portfolio of Prototype Ready IP and advanced verification and acceleration solutions, S2C solutions greatly reduces the SoC design cycle.

In addition to the headquarters in San Jose, CA, S2C currently has 4 direct offices located in Shanghai, Beijing, Shenzhen China and HsinChu, Taiwan. S2C is also the organizer of the annual SoCIP seminar and exhibition in China, which brings SoC designers from the Asia-Pacific region together with international silicon IP and SoC solution vendors. For more information, visit

Contacts for S2C:

Steve Pollock, S2C, USA, Phone: +1 408 600-0547 Michel Cao, S2C, China, Phone: +86 21 6887 9287 Email:


Active Debug™ is a trademark of InPA Systems, Inc. S2C, Prototype Ready, and TAI, are trademarks of S2C, Inc. All other trademarks and registered trademarks are the property of their respective owners.