General PeripheralsRequest for Quote

General Peripheral Modules provides a number of most popular interfaces common to most SoC/ASIC such as USB, PCIe, PCI, Gigabit-Ethernet, and AD/DA. The Mictor Interface Module provides convenient probing of Prodigy Logic Module's using an Agilent logic analyzer and the D-MAX Interface Module provides convenient probing of Prodigy Logic Module's using a Tektronix logic analyzer.


Prodigy GPIO Extension Module

 

  • Prodigy GPIO Extension Module provides two RS232s on 3-pin headers, two I2C interfaces, one Mictor-38 connector, one 20-pin ARM JTAG connector, 8 LEDs, 4 push buttons, 8 switches, GPIO on pin headers and 2 channels of GT transceivers through MMCX connectors.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 


RS232 Interface Module

  • RS232 Interface Module enables user designs in Prodigy Logic Modules to interface to two RS232 interfaces via on-board GPIO pins.
  • Occupies four GPIO pins on Prodigy Logic Modules.
  • Support VU, KU, V7 and K7 Prodigy Logic Module directly.

 


GPIO Extension Module

  • Description GPIO Extension Module provides two 10x2 pin headers, 32 LED, 6 SMB, 32 switches, 6 push buttons and one ARM JTAG interface for general debug and test purposes.
  • Occupies one LM Connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


General Peripheral Interface Module Type A

  • General Peripheral Interface Module Type A provides 2 NOR Flash, 2 SPI Flash, 2 I2C Slave, 2 ARM ICE JTAG, 2 UART and 26 GPIOs.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


General Peripheral Interface Module Type B

 

  • General Peripheral Interface Module Type B provides 1 NOR Flash, 4 USB OTGS, 5 UARTs and 1 ARM JTAG ACE.
  • Occupies two LM connectors.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Processor Peripheral Module

  • Provides common processor peripherals that include SDRAM SO-DIMM, 4Mbit Linear Flash, SD card SoCket, JTAG connector, two RS-232 connectors, and several push buttons and switches.
  • Occupies two LM connectors.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Prodigy Processor Peripheral Module

  • Prodigy Processor Peripheral Module provides common processor peripherals that include NAND Flash socket, NOR Flash socket, SPI Flash socket, EEPROM socket, MicroSD card, ARM JTAG, ART ETM Debugger Trace and user IOs.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Mictor Interface Module

  • Provides convenient probing of Prodigy Logic Module's 120-pin IO connectors through four Mictor connectors using an Agilent logic analyzer.
  • Performs quick prototyping with push buttons, 8-bit switch, 8-bit LED, oscillator clock input, SMB clock input.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


D-Max Interface Module

  • Enables convenient debugging using external Tektronix Logic Analyzer and has 8 switches, 8 LED, 3 push buttons and many jumper pins.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


2 Channel USB2.0 OTG PHY Interface Module

  • 2 Channel USB2.0 OTG PHY Interface Module enables user designs in Logic Modules to interface to two USB2.0 OTG via ULPI interface.
  • Occupies one LM connector
  • Support V7 and K7 Prodigy Logic Module directly.

 


USB2.0 PHY Interface Module

  • Enables user designs in Prodigy Logic Modules to interface to USB 2.0 hosts via UTMI interface.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


USB3.0 PHY Interface Module

  • USB3.0 PHY Interface Module enables user designs in Prodigy Logic Modules to interface to USB3.0 hosts via PIPE interface.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 



USB2.0 Data Transfer Module

 

  • USB2.0 Data Transfer Module uses a Cypress CY7C68013A USB microcontroller to support a USB connections to the host computer.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


PCIe 1-Lane PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Enables user designs in Prodigy Logic Modules to interface to 1-lane PCI Express v1.1 devices through TI's XIO1100 PHY chips.
  • Occupies one Samtec 120 pin connector (the package including one set of OSS PCIe cards & Cable).
  • Support V7 and K7 Prodigy Logic Module directly.

 


PCI Interface Module

  • Enables user designs in Prodigy Logic Modules to interface to 32bit PCI at 33MHz.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


2 Channel PCI Master Interface Module

  • Enables user designs in Prodigy Logic Modules to interface to two 32bit PCI Master Socket at 33MHz.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Gigabit Ethernet PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Enables user designs in Prodigy Logic Modules to interface to external 1G/100M/10M Ethernet devices through Marvell's 88E1111 chips.
  • Occupies one LM Connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


2 Channel Gigabit Ethernet PHY Interface Module

  • Enables user designs in Prodigy Logic Modules to interface to external 1G/100M/10M Ethernet PHY through Marvell's 88E1111 chips
  • It support both GMII and RGMII Interface
  • Occupies one LM connector
  • Support V7 and K7 Prodigy Logic Module directly.

 


FTDI Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Connects Prodigy Logic Module to a FT4232H Mini Module (not included) and allow designers to quickly prove functionality of adding USB to a target design with I2C master, SPI master and UART ports.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Prodigy 3 Channel RGMII PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Enables user designs in Prodigy Logic Modules to interface to external 10M/100M/1000M Ethernet PHY in RGMII mode through three Marvell’s 88E1116R chips.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Prodigy 3 Channel GMII Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Prodigy 3 Channel GMII PHY Interface Module supports GMII Protocols.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


2 Channel RGMII PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Enables user designs in Prodigy Logic Modules to interface to external 10M/100M/1000M Ethernet PHY in RGMII mode through two Marvell’s 88E1512 chips.
  • Occupies one LM I/O Connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


2 Channel GMII PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Enables user designs in Prodigy Logic Modules to interface to external 10M/100M/1000M Ethernet PHY in GMII mode through two Marvell’s 88E1119R chips.
  • Occupies one LM I/O Connector.
  • Support V7 and K7 Prodigy Logic Module directly.