S2C - Products

中文	Home\|Support

Products

SoC Services

Methodologies

Partners

Corporate

View All Silicon IP　>>

Product Package

Home >> Products > Prototyping Hardware > TAI LM Accessories

S2C provides a number of off-the-shelf accessories for TAI Logic Module to further speed up and simplify your system prototyping process.

Mictor Interface Module

Processor Peripheral Module

MP3 Reference Module

ARM Interface Module

9Mbyte SRAM Module

Third-Party Hardware Interface Module

TI AD/DA Interface Module

128Mbyte DDR Memory Module

DDR2 2IO Module

TAI Logic Module IO Connector (Samtec)

TAI Logic Module IO Cable (Samtec)

Mictor Interface Module

	Provides convenient probing of TAI Logic Module's 120-pin IO connectors through four Mictor connectors using an Agilent logic analyzer.
	Performs quick prototyping with push buttons, 8-bit switch, 8-bit LED, oscillator clock input, SMB clock input.
	Occupies one TAI Logic Module IO connector.

Processor Peripheral Module

	Provides common processor peripherals that include SDRAM SO-DIMM, 4Mbit Linear Flash, SD card socket, JTAG connector, two RS-232 connectors, and several push buttons and switches.
	Occupies two TAI Logic Module IO connectors.

Mp3 Reference Module

	Interfaces to on-board Atmel 8051-based MP3 controller.
	Equipped with 3*4 keypad, buzzer, microphone, speaker, ADC/DAC audio, LCD display, MMC/SD card, crystal clock generator, and I2S.
	Occupies two TAI Logic IO connectors.

ARM Interface Module

	Interfaces to ARM Core modules, enabling TAI Logic Module to connect to the following ARM processors: ARM7TDMI, ARM920T,ARM922T, ARM926EJ-S, ARM940T, ARM946E-S, ARM966E-S, ARM1020E, ARM1026EJ-S, and ARM1136JF-S.
	Occupies two or three TAI Logic Module IO connectors, depending on the AHB bus mode.

9Mbyte SRAM Module

	Adds 9 Mbytes of external SRAM memory, configurable as 2M X 36bits, to TAI Logic Module.
	Expandable to 18 Mbytes by stacking two 9 Mbytes modules together.
	Occupies one TAI Logic Module connector.

Third-Party Hardware Interface Module

	Connects daughter boards made for third-party FPGA hardware to TAI Logic Module.
	Occupies two TAI Logic Module connectors.

TI AD/DA Interface Module
Third-Party Hardware Interface Module

	Interfaces with various AD/DA modules provided by TI to link with TAI Logic Module.
	Features on-board 2VP20 Pro FPGA to buffer fast data rate.
	Support two channel AD/DA.
	Resolution ratio:14bit.
	Speed:125Msps.
	Occupies two TAI Logic Module connectors.

128MB DDR Memory Module

	Adds 128MB of external DDR1 memory to single TAI Logic Module IO.
	Datawidth: up to 64bit.
	Speed: 100M.
	Occupies one TAI Logic Module connectors.

DDR22IO Module

Converts DDR2 SODIMM socket into a TAI Logic Module IO connector, adds about 126-226 IO for customers.

TAI Logic Module IO Connector (Samtec)

Connects TAI Logic Module to your target board by way of direct connection or cable. The IO connectors come in two types, sockets or terminals, and are available in different heights.

TAI Logic Module IO Cable (Samtec)

	Connects TAI Logic Module to external target boards through cabling.
	Standard IO cable length is 12 inches.