Embedded & MultimediaRequest for Quote

S2C has specifically designed a series of daughter boards for Embedded & Multimedia applications such as HDMI, DVI and MIPI.

Prodigy DVI Output Interface Module

  • Prodigy DVI Output Interface Module provides one DVI transmitter channel interface for Prodigy Logic Modules users.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


DVI Input Interface Module

  • Provides one DVI receiver channel interface using Silicon Image’s SIL1161 chip.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


DVI Output Interface Module

  • Provides one DVI transmitter channel interface using Silicon Image’s SIL1160 chip.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Prodigy HDMI Interface Module

  • Prodigy HDMI Interface Module provides a HDMI video output using the Analog Devices ADV7511KSTZ HDMI Transmitter and a HDMI video input using the Analog Devices ADV7612BSWZ HDMI Receiver. The HDMI output and input are provided on a Molex 500254-1927 HDMI Type-A connector.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


HDMI Transmitter Interface Module

  • High Definition Multimedia Interface (HDMI) compliant TMDS digital transmitter that supports 12-bit Deep Color operation to all video formats up to 1080p.
  • It supports the HDMI v1.4-specific feature, HEAC(ARC), and 3D video.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


MIPI D-PHY Interface Module

 

  • MIPI D-PHY Interface Module provides both 4 channel MIPI D-PHY RX and 4 channel MIPI D-PHY TX using Meticom MC20901 RX chip and MC20902 TX chip.
  • Occupied one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


MIPI D-PHY Prototyping Kit

The MIPI D-PHY Prototyping Kit provides the necessary components to run MIPI D-PHY applications on S2C Prodigy™ Logic Modules. The Kit includes one S2C MIPI D-PHY Interface Module, one OV2710 Camera Module, one 70WW2A WVGA Display and eight 300mm MMCX to SMB Cables.

MIPI D-PHY Interface Module

  • Supports the fully defined MIPI Rx Interface and MIPI Tx Interface through an MMCX connector.
  • A fully defined MIPI interface requires one clock lane and four data lanes using Meticom MC20901 as a Rx D-PHY chip and Meticom MC20902 as a Tx D-PHY chip.
  • MIPI D-PHY Interface Module occupies one Logic Module connector and can be used on S2Cs Prodigy Virtex-7 Series Logic Modules.

Additional Features:

  • 5 Pairs MMCX for MIPI Rx
  • 5 Pairs MMCX for MIPI Tx
  • MC20901 conversion of SLVS input to LVDS output up to 1.4Gbps
  • MC20902 conversion of LVDS input to SLVS output up to 1.4Gbps
  • Support Bus Turnaround option on Channel E
  • On board level shifter circuitry to support 1.2V~1.8V I/O
  • On board I2C Interface to Camera and Display
  • Occupies one LM connector
  • Support V7 and K7 Prodigy Logic Module directly.

 


Embedded Peripheral Interface Module Type A

  • Provides one VGA interface, one UART socket, one ARM ICE JTAG, one SD Card, one I2S interface, one Camera Socket and one USB PHY through one LM connector.
  • All interfaces are level shifted to 1.8V.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


 

Embedded Peripheral Interface Module Type B

  • Provides one LCD socket, one touch panel socket, one EMMC4.4 NAND Flash, one SDIO socket, one Mini PCIe socket and two channels SPI interfaces through one LM connector.
  • All interfaces are level shifted to 1.8V.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.