General PeripheralsRequest for Quote

General Peripheral Modules provides a number of most popular interfaces common to most SoC/ASIC such as USB, PCIe, PCI, and Gigabit-Ethernet. The Mictor Interface Module provides convenient probing of Prodigy Logic Module's using an Agilent logic analyzer and the D-MAX Interface Module provides convenient probing of Prodigy Logic Module's using a Tektronix logic analyzer.


Prodigy ETM4 Module

 

  • Prodigy ETM4 Module provides one ARM ETM4 interface, one 9-pin UART interface, one Micro SD card socket, one ARM JTAG port and some GPIOs.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 



Prodigy GPIO Extension Module

 

  • Prodigy GPIO Extension Module provides two RS232s on 3-pin headers, two I2C interfaces, one Mictor-38 connector, one 20-pin ARM JTAG connector, 8 LEDs, 4 push buttons, 8 switches, GPIO on pin headers and 2 channels of GT transceivers through MMCX connectors.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 



GPIO Level Shifting Module

 

  • GPIO Level Shifting Module level shifts 64 signals on a 120-pin LM connector and 10 signals on a 10-pin pin header from 1.8v to 2.5/3.3V on two 40-pin GPIO pin headers.
  • The Level Shifting Module supports bi-directional translation.
  • Occupies one LM I/O Connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


RS232 Interface Module

  • RS232 Interface Module enables user designs in Prodigy Logic Modules to interface to two RS232 interfaces via on-board GPIO pins.
  • Occupies four GPIO pins on Prodigy Logic Modules.
  • Support VU, KU, V7 and K7 Prodigy Logic Module directly.

 


GPIO Extension Module

  • GPIO Extension Module provides two 10x2 pin headers, 32 LED, 6 SMB, 32 switches, 6 push buttons and one ARM JTAG interface for general debug and test purposes.
  • Occupies one LM Connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


General Peripheral Interface Module Type A

  • General Peripheral Interface Module Type A provides 2 NOR Flash, 2 SPI Flash, 2 I2C Slave, 2 ARM ICE JTAG, 2 UART and 26 GPIOs.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


General Peripheral Interface Module Type B

 

  • General Peripheral Interface Module Type B provides 1 NOR Flash, 4 USB OTGs, 5 UARTs and 1 ARM JTAG ACE.
  • Occupies two LM connectors.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Prodigy Processor Peripheral Module

  • Prodigy Processor Peripheral Module provides common processor peripherals that include NAND Flash socket, NOR Flash socket, SPI Flash socket, EEPROM socket, MicroSD card, ARM JTAG, ART ETM Debugger Trace and user IOs.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Processor Peripheral Module

  • Processor Peripheral Module provides common processor peripherals that include SDRAM SO-DIMM, 4Mbit Linear Flash, SD card Socket, JTAG connector, two RS-232 connectors, and several push buttons and switches.
  • Occupies two LM connectors.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Mictor Interface Module

  • Mictor Interface Module provides convenient probing of Prodigy Logic Module's 120-pin IO connectors through four Mictor connectors using an Agilent logic analyzer.
  • Performs quick prototyping with push buttons, 8-bit switch, 8-bit LED, OSC clock input, SMB clock input.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


D-Max Interface Module

  • D-Max Interface Module enables convenient debugging using external Tektronix Logic Analyzer and has 8 switches, 8 LED, 3 push buttons and many jumper pins.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Prodigy USB Interface Module

  • The Prodigy USB Interface Module enables user designs in S2C Logic Modules to interface to USB3.0 hosts via a PIPE interface and USB2.0 hosts via UTMI or ULPI interfaces.
  • The Module occupies one S2C Prodigy I/O connector.
  • This interface module supports all VU, KU, A10 and S10 Prodigy Logic Modules.

 


2 Channel USB2.0 OTG PHY Interface Module

  • 2 Channel USB2.0 OTG PHY Interface Module enables user designs in Logic Modules to interface to two USB2.0 OTG via ULPI interface.
  • Occupies one LM connector
  • Support V7 and K7 Prodigy Logic Module directly.

 


USB2.0 PHY Interface Module

  • USB2.0 PHY Interface Module enables user designs in Prodigy Logic Modules to interface to USB 2.0 hosts via UTMI interface.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


USB3.0 PHY Interface Module

  • USB3.0 PHY Interface Module enables user designs in Prodigy Logic Modules to interface to USB3.0 hosts via PIPE interface.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 



USB2.0 Data Transfer Module

 

  • USB2.0 Data Transfer Module uses a Cypress CY7C68013A USB microcontroller to support a USB connections to the host computer.
  • Occupies one LM connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


Prodigy PCI Interface Module

  • Prodigy PCI Interface Module provide 32-bit 3.3V PCI interface.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Prodigy 3 Channel RGMII PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Prodigy 3 Channel RGMII PHY Interface Module enables user designs in Prodigy Logic Modules to interface to external 10M/100M/1000M Ethernet PHY in RGMII mode through three Marvell’s 88E1116R chips.
  • Occupies one Prodigy I/O Connector.
  • Support VU and KU Prodigy Logic Module directly.

 


Prodigy 3 Channel GMII Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • Prodigy 3 Channel GMII PHY Interface Module supports GMII Protocols.
  • Occupies one Prodigy I/O connector.
  • Support VU and KU Prodigy Logic Module directly.

 


2 Channel RGMII PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • 2 Channel RGMII PHY Interface Module enables user designs in Prodigy Logic Modules to interface to external 10M/100M/1000M Ethernet PHY in RGMII mode through two Marvell’s 88E1512 chips.
  • Occupies one LM I/O Connector.
  • Support V7 and K7 Prodigy Logic Module directly.

 


2 Channel GMII PHY Interface Module

Prodigy Logic Module IO Cable (Samtec)

  • 2 Channel GMII PHY Interface Module enables user designs in Prodigy Logic Modules to interface to external 10M/100M/1000M Ethernet PHY in GMII mode through two Marvell’s 88E1119R chips.
  • Occupies one LM I/O Connector.
  • Support V7 and K7 Prodigy Logic Module directly.