S2C.
S2C.

CEO Interview: Toshio Nakama of S2C | SemiWiki.com

CEO Interview: Toshio Nakama of S2C | SemiWiki.com Jan 16, 2017
Table of Content [Hide]

    Daniel Nenni   Published on 01-16-2017 06:00 AM



    How Has FPGA Prototyping Evolved and What's Next?


    Toshio: FPGA prototyping has traditionally been thought of as an adjunct to emulation: something that was nice to have but because of its complexities of employment was never fully adopted. Times have changed however, FPGA prototyping has become much easier to use and because of increasing design complexity it has become a must-have tool in the design and verification flow. Partitioning the design has always been one of the hurdles to adoption, but FPGA partition tools have advanced to handle even the largest designs while FPGAs themselves have increased in capacity to reduce the number of FPGAs needed.


    As to the second part of your question, FPGA prototyping is being used more and more by dispersed design and verification teams. No longer are singular teams all sitting together in the same room or the same office for that matter. To accommodate this FPGA prototyping must take to the cloud and allow globalized teams to share resources. In fact, FPGA prototyping solutions must also allow teams working on multiple designs to share resources and not limit the shared resources to a single design or instance.



    What Is Unique About S2C?


    Toshio: We are experts in FPGA prototyping. We are proud to have the largest team dedicated to the technology of FPGA prototyping. Our expertise comes from the development of hundreds of customized prototyping environments that have created a very robust engineering knowledge base for developing reliable, easy-to-implement, and extremely efficient solutions. We have consistently made sure to push the boundaries of what FPGA prototyping can do so that our customers can gain a competitive advantage.


    Through our many interactions with customers, we've realized that scalability is a key component. Our customers' complex designs have given rise to untethered scalability. Increased I/O counts, significant memory throughput, and a large number of DSPs have become commonplace.



    How Do Designers Get the Most Out of FPGA Prototyping?


    Toshio: There are many ways for that to happen. One significant solution is to make FPGA prototyping part of your overall design process. I believe, Mon-Ren Chene, our CTO, mentions this in the book that you published. Designers can benefit greatly by designing with prototyping in mind. Doing so will speed up the prototyping process down the road and help with synthesis, partitioning and debug. As we outlined in the book, there are six ways that designing for prototyping can be achieved: Prototyping-friendly design hierarchies, block-based prototyping, a clean and well-defined clock network, memory modeling, register placement, and avoiding asynchronous or latch-based circuits.



    Do You See FPGA Prototyping Expanding Its Role Beyond SoCs?


    Toshio: Advances in FPGAs has opened the door to new areas of adoption. We’re seeing the benefits for areas related to high-performance computing and artificial intelligence. We’re already addressing the HPC market with our upcoming unveiling of our Prodigy Arria 10 Logic Module. We’re excited to see that the benefits of FPGAs can be realized beyond traditional markets. Stay tuned for lots more to come from S2C on these fronts.



    About S2C


    With over 200 customers and more that 800 systems installed, S2C's focus is on SoC/ASIC development to reduce the SoC design cycle. Our highly qualified engineering team and customer-centric sales force understands our users’ SoC development needs. S2C systems have been deployed by leaders in consumer electronics, communications, computing, image processing, data storage, research, defense, education, automotive, medical, design services, and silicon IP. S2C is headquartered in San Jose, CA with offices and distributors around the globe including the UK, Israel, China, Taiwan, Korea, and Japan. For more information, visit http://www.s2ceda.com/.

    Back to list Back to list
    Related S2C Complete Prototyping Solutions
    High Speed MCIO Peripherals
    8-Lane PCIe Root Complex MCIO ModuleProvides one x16 PCIe Slot, only support 8 lanesProvides one 100MHz reference clockProvides 3 LEDs and 1 Push ButtonsOccupies two MCIO connectorsMCIO to PGT Convert...
    Prodigy Logic Matrix
    High Performance and HighDensity Prototyping
    Expansions & Accessories
    FMC-HPC Converter Module, FMC-LPC Converter Module, Pin Header Module, HT3 Converter Module, Mini-SAS Converter Module
    What's New at S2C
    References
    Request for Quote
    What type of chip are you designing
    What is the capacity of the ASIC gate included in the design?
    5 million-20 million
    20 million-50 million
    50 million-100 million
    100 million-1 billion
    More than 1 billion
    Which FPGA do you prefer to use?
    Xilinx VU440
    Xilinx KU115
    Xilinx VU19P
    Xilinx VU13P
    Xilinx VU9P
    AMD VP1802
    AMD VP1902
    Intel S10-10M
    Intel S10-2800
    Not sure, need professional advice
    What kind of FPGA configuration do you need?
    Single FPGA
    Dual FPGA
    Four FPGAs
    Eight FPGAs
    Not sure, need professional advice
    What kind of peripheral interface do you need?
    How many prototype verification platforms do you need?
    Do you need the following tools?
    Segmentation tool
    Multiple FPGA debugging tools
    Co-modeling tool (allows large amounts of data to interact between FPGA and PC host)
    When do you need to use our products?
    0-6 months
    6-12 months
    More than 12 months
    Not sure
    Any additional comments?