S2C Limited.
S2C Limited.

S2C Announces Virtex-6 Based 4th Generation Rapid SoC Prototyping Solution

S2C Announces Virtex-6 Based 4th Generation Rapid SoC Prototyping Solution Aug 30, 2010

Uses the New 40nm Xilinx Virtex FPGA to Achieve Up to 15.2 Million ASIC Gates

San Jose, Calif. – August 30, 2010 S2C Inc., a rapid SoC prototyping provider, announces the release of its fourth-generation rapid SoC prototyping tool, V6 TAI Logic Module, based on Xilinx’s 40-nm Virtex™ field-programmable-gate-array (FPGA).

Each Dual V6 TAI Logic Module comes with two Virtex-6 XC6VLX760 FPGAs, each featuring 759K logic cells. The Dual V6 TAI Logic Module supplies up to 15.2 million ASIC gates of capacity and provides 1,280 external I/O connections.  Multiple TAI Logic Modules can be stacked or mounted on a interconnect mother board to meet even larger gate count needs.

S2C’s 4th generation logic modules have many significant improvements over the third-generation product.  In addition to more than doubling the logic and memory capacity that can fit on single board, the new TAI Logic Module facilitates much higher system prototype performance and reliability through enhanced power management, clock management, cooling mechanisms and noise shielding.  

Leadcore Technology Co., Ltd. has been using Virtex 5 based TAI Logic Modules.  Leadcore, the world leading TD-SCDMA terminal solutions provider, is the core member of Datang Telecom Technology & Industry Group. Its main customers include ZTE and LG.  Wang Pei, Manager of Testing and Technical Support Division at Leadcore said: "we have very successfully been using S2C’s TAI Logic Modules as an integral part of our SoC design flow.  We plan on using the new Virtex 6 TAI Logic Module for our next generation products."

The V6 TAI Logic Modules can run both 2GB of DDR2 and 2GB of DDR3 memory at up to 667MHz .  S2C offers a large library Prototype Ready IP™ consisting of pre verified digital IP and of off-the-shelf daughter modules, including H.264, DDR2/3, PCIe, Gigabit Ethernet, SRAM, and DVI, to further accelerate user’s development of rapid FPGA prototypes.

“ Along with the V6 TAI Logic Module launching, our TAI Player Pro software version 3.3 has been upgraded to fully support the Virtex-6 FPGA, giving designers greater control over the prototype flow process, from multi-FPGA synthesis, partitioning and RTL-level probing to FPGA place-and-route. The latest software now supports incremental probing function utilizing FPGA editor technology, that dramatically saves FPGA re-compile time," noted Mon-Ren Chene, Chairman and CTO of S2C.  “ Once designs are compiled, S2C’s TAI Player software allows users to rapidly download them to the FPGAs, generate programmable clocks, and self-test hardware straightforwardly via a USB2.0 connection.  Our goal has always been to allow our customers to focus on designing and verifying their SoC chips rather than on building or debugging FPGA prototypes.

V6 TAI Logic Module is now shipping with either Virtex-6 XC6VLX760 or XC6VLX550T FPGAs. The V6 TAI Logic Module can mount either one or two FPGA devices per module.  All V6 TAI Logic Modules adopt a similar form factor to all previous TAI Logic Module generations,, so existing customers can easily upgrade and re-use their current daughter cards or mother boards.

About S2C

Founded and headquartered in San Jose, California, S2C has been successfully delivering rapid SoC prototyping tools since 2003.  S2C provides:

  • Rapid SoC FPGA-based prototyping hardware systems plus design and verification software.

  • Third-party Prototype Ready IP™

  • SoC design, prototype and production services

S2C’s value proposition is our highly qualified engineering team and customer-focused sales force that understands our customers’ commercial SoC development needs.  S2C’s unique FPGA-based electronic system level (ESL) solution, using our patented TAI IP technology, enables designers to quickly assemble FPGA-based SoC prototypes on S2C FPGA boards easily and securely.  This enables customers to start software development, typically the long pole item in development schedules, immediately.  Combining rapid prototyping methodologies with a comprehensive portfolio of Prototype Ready IP and advanced design solutions, S2C can reduce the SoC design cycle by up to nine months.

S2C currently has 3 direct offices located in Shanghai, Beijing and Shenzhen to meet the demand for accelerated SoC design activities in China. S2C is also the organizer of the annual SoCIP seminar and exhibition in China, which brings SoC designers/professionals from the Asia-Pacific region together with international silicon IP and SoC solution vendors. For more information, visit www.s2cinc.com.

Contacts for S2C:

Steve Pollock, S2C Inc., San Jose, Phone: +1 408 600-0547 Email:stevep@s2cinc.com Michel Cao, S2C Inc., Shanghai, Phone: +86 21 6887 9287 Email:michelc@s2cinc.com


S2C, Prototype Ready IP and TAI, are trademarks of S2C, Inc. Virtex is a registered trademark of Xilinx. Inc.. All other tradenames and trademarks are the property of their respective owners.

Back to list Back to list
Related S2C Complete Prototyping Solutions
Prodigy S8-40 Logic Systems
The Prodigy S8-40 Logic Systems leverages the latest AMD FPGA device and the use of high-performance I/O connectors to provide the highest performance and the most scalability for modern VLSI SoC desi...
Virtex UltraScale Series
S2C's Virtex UltraScale (VU) Prodigy Logic Systems are built on the Virtex UltraScale XCVU440 FPGA from Xilinx.
Arria 10
S2C's Arria 10 Prodigy Logic systems offers low-profile chassis design with Intel Arria 10GX1150 FPGA.
What's New at S2C
Request for Quote
What type of chip are you designing
What is the capacity of the ASIC gate included in the design?
5 million-20 million
20 million-50 million
50 million-100 million
100 million-1 billion
More than 1 billion
Which FPGA do you prefer to use?
Xilinx VU440
Xilinx KU115
Xilinx VU19P
Xilinx VU13P
Xilinx VU9P
Intel S10-10M
Intel S10-2800
Not sure, need professional advice
What kind of FPGA configuration do you need?
Single FPGA
Four FPGAs
Eight FPGAs
Not sure, need professional advice
What kind of peripheral interface do you need?
How many prototype verification platforms do you need?
Do you need the following tools?
Segmentation tool
Multiple FPGA debugging tools
Co-modeling tool (allows large amounts of data to interact between FPGA and PC host)
When do you need to use our products?
0-6 months
6-12 months
More than 12 months
Not sure
Any additional comments?